Mounting screw
| Impact resistance and shock resistance | Vibration (sinusoidal): 5 g, 10–1000 Hz in accordance with EN 60068-2-6 Surge (half-sine wave): 30 g, 11 ms in accordance with EN 60068-2-27 |
| Data transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 bits/s |
| Interface type | Serial |
| Physical characteristics | RS-485 |
| Physical characteristics | RS 232 |
| LEDs CH1, CH2 | Green: read head detected Red: configuration error |
| Interface type | Serial |
| Nominal operating voltage | 20 … 30 V DC, PELV |
| Ripple | 10% at 30 V DC |
| Вес | Approx. 300 g |
| Number of read/write heads | max. 2 Alternatively, 1 read/write head and 1 trigger sensor |
| Класс защиты | IP67 |
| RxD LED | green: flashes in time with the received data |
| Protocol | ASCII |
| Ambient temperature | -25 … 70 V°C (-13 … 158 V°F) |
| Power consumption | 2 W Without read/write heads |
| Storage temperature | -40 … 85 V°C (-40 … 185 V°F) |
| Protection class | IEC 60529:2001 |
| Connection | Read/write heads: shielded, 4-pin M12 connector Power supply: M12 connector Protective grounding: M4 grounding screw RS 232: M12 connector RS 485: M12 connector |
| Power consumption | 4 A on. Read/write heads |
| TxD LED | green: flashes in time with the transmitted data |
| MTTFd | 160 A |
| Diagnostic coating (DC) | 0 |
| Galvanic isolation | Basic insulation in accordance with. in accordance with DIN EN 50178, rated insulation voltage 50 Veff |
| LEDs 1, 2 | Read/write head status indication |
| Climatic conditions | Maximum humidity. 96 Salt fog resistance in accordance with EN 60068-2-52 |
| Data transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 bps |
| UL file number | E87056 |
| Protocol | ASCII |
| PWR/ERR LED | Green: power on Red: equipment failure |
| Task execution time (TM | 10 A |